All four seasons are joyful, preferably in the new autumn. As autumn approaches, the 2024 Shanghai Automotive Testing Exhibition is held grandly as scheduled. Zer Testing and AB Dynamics make their debut at the annual automotive testing exhibition. As a "specialized, international, and branded" automotive testing and communication platform, ATE Shanghai has attracted many well-known domestic and foreign manufacturers to participate in the exhibition. The grand exhibition booth of Zel and ABD, covering an area of over 100 square meters, features a dazzling array of automotive testing products, attracting numerous visitors to come and inquire.

At the United Nations World Forum for the Coordination of Vehicle Regulations, the "Three Pillar Method" was proposed as a new approach for future high-level autonomous driving testing and verification. Zer Testing has been deeply involved in the field of automotive testing for over 20 years, and its products and services have been involved in and leading the development of the industry in the three pillar testing field. Its full range of products are applied to closed site testing, open road testing, virtual simulation testing, and functional safety testing,

On the second day of this exhibition, Zer conducted a live introduction of our automotive testing three pillar products with ABD and Dewetron booths, which facilitated customers who could not participate in the exhibition to learn about our series of products and attracted the attention of many customers. 

ASEva

The ASEva system is a self-developed, lightweight, highly reliable, and customizable collection and analysis comprehensive platform by Zer. The system has a complete set of scene data collection and processing toolchain, which provides toolchain for scene data collection, data annotation, scene extraction, cloud scene data post-processing, cloud data injection, scene simulation, scene generalization, scene based functional analysis, etc. It can collect and extract driving scene data, providing a tool for converting real scene data into a virtual simulation environment, thereby enabling accurate reproduction of real scenes in the virtual environment. At the same time, the system can be applied to functional safety and expected functional safety testing, open road testing, closed field testing, simulation testing, driving behavior analysis, ADAS testing, functional evaluation analysis, etc.

VBOX

The VBOX produced by the company is the industry standard for measuring vehicle speed and position, with a powerful and flexible data acquisition system and ADAS specific application solutions.  

VB4

The all-new VBOX 4 is designed for versatility and excels in a range of automotive testing applications, including brake testing, ADAS sensor validation, and high dynamic testing.

Wheel speed sensor

The wireless wheel speed sensor SENWS1 is a device that can detect wheel speed and temperature in real time. The system transmits the collected wheel speed and temperature wirelessly to the receiving end, which outputs the data from the CAN/Ethernet interface, making it very convenient to monitor the wheel speed and temperature.

Steering wheel

The RLSTSENSOR series sensors are specifically designed for modern vehicle steering wheels, such as passenger cars and multi-purpose vehicles. The introduction of new driving assistance systems requires better performance testing equipment. Perfectly meet the needs of modern automotive engineering.Reducing size and weight, the sensor has a high breaking torque. Sensors can be equipped with interchangeable adapters for connecting to the steering shaft transmission device. It is also equipped with switch reset torque and angle. The offset is stored and remains available even after voltage loss or restart. Through the CAN bus, the output can be set to zero at any point. Calibration data is stored in sensor components, allowing users to replace sensor components as needed.

3iSDR

VBOX 3iS dual antenna RTK is a compact GNSS assisted inertial navigation system (INS) that supports Ethernet connection with robots and can use wheel speed data from the vehicle's CAN bus. VBOX 3iS dual antenna supports RTK (Real Time Kinematic) and can provide centimeter accuracy when used in conjunction with RTK base stations or other RTCMv3 correction sources (such as NTRIP). This enables it to be used as a moving target, as part of VBOX ADAS setup, or in conjunction with a steering robot, connected via Ethernet.

LabSat

LabSat is a GPS simulator with recording and playback functions, which enables global GPS testing to be conducted in the laboratory. It can be used to test and develop GPS smartphones, portable navigation devices, GPS tracking systems, and calibrate GPS products such as VBOX systems.

MoshonData

A good choice for vehicle soft targets. Whether you need official Euro NCAP or C-NCAP standard vehicle targets, NHTSA SSV vehicle targets, or customized solutions, MonshonData can meet your needs.

Flowtronic fuel consumption meter

Equipment mainly used for measuring fuel consumption of internal combustion engines (applicable to basic fuel types such as gasoline, diesel, biofuels, and alcohol). Their usage covers motorcycles, passenger cars, buses, trucks, special-purpose vehicles, and ships, among others. It can be used in both mobile vehicles and stationary bench tests. Due to its simple operation, sturdy and durable structure, high measurement accuracy, and unique quality, the Flowtronic system is suitable for measuring the consumption of various types of liquid fuels. The latest generation of updated products has targeted upgrades to the corrosion resistance of methanol fuel, allowing for long-term testing.

Infomagix

Infomagix showcased the VMS 3400 APS throttle opening control system.

Zeer self-developed sensor series

Zeer showcased self-developed tire temperature and pressure sensors, shift force sensors, handbrake force sensors, pedal force sensors, and acceleration sensors.

ABD

The company has developed a series of computer-controlled robotic in car testing products, specifically designed for testing vehicle dynamics, steering systems, and braking systems. They can also be used for other testing applications, such as the development of advanced driving assistance systems, which can enable rapid, accurate, and highly repetitive testing and obtain high-quality objective data.

This showcase includes Halo steering robot, Launch Pad Spin, LP80, GTC remote, 360 soft target series, etc.

Ansible Motion

Ansible Motion designs, manufactures, integrates, and supports ground vehicle simulators for engineering purposes, focusing on immersive simulation. The static driving simulator showcased this time attracted many viewers to test drive and have a firsthand experience and feeling of the product.

The three-day exhibition provides new and old customers with a comprehensive understanding of our company's full range of products and the latest technological developments through our booth and live streaming.

”Making excellence even better "has always been Zel's pursuit. Zel will continue to pay attention to customer needs and provide the most suitable solutions. Looking forward to seeing you again at next year's testing exhibition!